2023 S&S Super 7 30 Ton Extrusion Stretch Forming Press

Fully equipped with:

 - Independent Arm Actuation

 - Gripper jaws 8” diameter

 - Manual operation

Technical Specifications:

Capacity 30 Ton 

Jaw Axis Rotation + 180 degrees 

Operating Pressure Max on gauge 3,000 PSI 

Tension Cylinder Stroke 30” 

Wrap Speed up to 300” ipm 

Tension Cylinder Rotation + 30 degrees 

Arm Swing (Each Arm) 3 degrees forward to 90 degrees 

Die Length At Full Tonnage and for 180 Degree Bend (longer dies can be used at lower tonnage): 

Maximum 293 Inches 

Minimum 28 Inches 

Maximum Distance Between Jaws: 8” Jaws 319” Inches 

Face To Face Machine Dimensions: 

Depth 273 Inches Height 54 Inches To Top Of Saddle Die table from floor 36 1/2 Inches 

Centerline of Jaw to Top of Table 8” Inches 

Electrical Requirements 480 volts, 3 phase, 240 volts 3 phase 

Weight 30,000 lbs.